-
What are the functions of motorcycle igniter and high pressure pack?
1¡¢ Motorcycle igniterThe function of the motorcycle igniter is to receive and store the ignition voltage provided by the magneto, accurately calculate the ignition time, and timely provide it to the high-voltage package. The high-voltage package inducts the low-voltage electricity of the igniter and supplies the spark plug ignition for the high-voltage electricity. In short, it is the device to start the motorcycle.The composition of motorcycle ......
-
What is a high pressure package?
High voltage pack, also known as line output transformer, also known as line pack or line transformer. The working principle of high voltage pack of display is basically the same as that of TV. Its main function is to generate anode high voltage and provide various voltages such as focusing, acceleration and grid. Due to the working conditions of high temperature, high frequency, high voltage and high current, and the influence of external envir......
-
How to judge whether motorcycle relay is good or bad?
Some things are not worth repairing when they are broken. This relay is only about 15 yuan when it is broken. If you really want it repaired, it will cost 10 yuan, or even more, and the time is much longer than the time of replacement. So it's better to replace the broken one. The new one is better than the old one. It is often better to replace something that is not expensive than to repair it, both for users and repairers. The relay has two sm......
-
On the principle and application of motorcycle rectifier
There is a very important electrical device on motorcycle, which supplies stable charging voltage for locomotive battery. This is voltage stabilizing rectifier, which is called "silicon rectifier" rectification, which is to change AC voltage into DC voltage. Voltage stabilization is to stabilize the output voltage of generator within the specified range, so as to make the battery charge reasonably and the lamp stable brightness; The devices that......
-
Basic composition of igniter
The composition of motorcycle igniter is mainly composed of power supply, ignition coil, distributor, ignition switch, spark plug, additional resistance and its short-circuit device, high and low voltage wire, etc.1. Power supply: composed of battery and generator. When starting, the ignition system is provided with low-voltage electric energy by the battery; After starting, when the generator voltage is higher than the battery voltage, the igni......
-
Working principle of igniter
The working principle of the motorcycle igniter is that the igniter and the sensor work together to determine the ignition time of the spark plug, also known as the ignition time. When the high voltage package amplifies the voltage, it supplies the spark plug for ignition. When the spark ignites the mixture of fuel and air, it will cause an explosion and push the piston up and down in the cylinder block, so as to achieve the function of starting......
-
What is motorcycle igniter?
Motorcycle igniter is a kind of auxiliary device to start the motorcycle engine. Its appearance is mostly black and square, and it is under the motorcycle cushion. The common ignition starting mode is divided into two ways: manual ignition starting mode and pedal starting mode. In terms of operation, the manual ignition starting mode is more convenient and fast than the traditional pedal starting mode....